DaVinci Chloe Regency M11441 4-in-1 Convertible Crib review

The DaVinci Chloe Regency M11441 is a full-size crib whose design is built around a shaped, molded headboard and a four-arrangement conversion path. DaVinci lists the assembled frame at 54.1 inches long, 30.25 inches wide and 43.5 inches high, with an assembled weight of 54.01 pounds. That 30.25-inch listed width first fits the review site's next selectable half-inch ceiling at 30.5 inches. It is a product dimension, not a room-clearance measurement.

Two exact finishes, with a current availability caveat

The official product data identifies White M11441W and Walnut M11441L as the finish variants under product ID 4532912750685. In the captured product data, both variants were marked unavailable. That is a checked-page observation rather than proof that no retailer has stock, that all remaining units are unavailable, or that the manufacturer's listing will stay unchanged. The two observed codes share one product listing and no finish-specific mechanical difference is documented, so they are treated as finish variants, not separate crib systems.

The selected reference image is the White M11441W version. It shows a molded rear panel, straight slats and a full-size crib arrangement. The image verifies the product and finish in the manufacturer gallery; it does not confirm what a seller's box contains. DaVinci describes the frame as solid New Zealand pine with TSCA-compliant MDF and says the product is GREENGUARD Gold certified. These claims come from the maker's product page; this article did not inspect material components or conduct emissions testing.

Four arrangements require more than one rail kit

The manufacturer calls M11441 a 4-in-1 crib and names toddler bed, daybed and adult full-size bed arrangements after the crib. Its product page specifically identifies toddler conversion kit M12599, full-size-bed kit M5789 and bunkie board M26058B as sold separately. The linked M11441 manual provides separate toddler-bed and full-size-bed conversion instructions and labels both M12599 and M5789 as not included. Those components are not part of the crib merely because the product title advertises conversion.

The adult bed is a later bed configuration, not another full-size crib stage. If a later adult bed is part of the household plan, verify the exact M11441 rail kit and the named support board in the seller offer and instructions. The current compatibility table page consulted for this review does not list a Chloe Regency row, so the assessment relies on the exact product page and linked manual for those named parts; it does not infer a missing table entry from another crib's kit compatibility. The adult-bed arrangement also requires a full-size mattress, and the crib page does not establish that a mattress comes with the base crib.

The listing documents four adjustable mattress-support positions. The manual requires lowering the support as the child begins to sit or stand and stopping crib use if the child begins climbing out or reaches 35 inches in height. For the toddler bed, the manual states a minimum intended age of 15 months and maximum user weight of 50 pounds. DaVinci lists 135 pounds as slat strength, which is not the maximum child-use limit. Each figure belongs to a different instruction or specification; do not substitute one for another.

Mattress fit is a separate decision from the rails

DaVinci lists a 52-by-28-inch interior crib measurement. The M11441 manual requires a full-size crib mattress at least 51 5/8 inches long by 27 1/4 inches wide, no thicker than six inches and with no more than a three-centimeter side gap. The manufacturer's page presents mattresses as separately selected options, so its base crib offer does not establish an included standard mattress. A bundled listing should be evaluated on its own contents and the exact mattress dimensions checked against the M11441 instructions.

The assembled height of 43.5 inches and listed weight of 54.01 pounds are useful for thinking about wall placement, access and moving the package; neither number tells you how much clearance an assembler needs. The exact sources reviewed do not document wheels for the full-size crib. Don't assume that a mattress, conversion rail or caster shown in promotional imagery accompanies a particular retail package.

Trade-offs and comparisons

Compared with Beau M23901, Chloe is 0.75 inches wider by the respective product-page dimensions and offers an adult-bed route, but its White and Walnut variants were unavailable in the captured manufacturer product data. Fiona M20801 is listed at 30.4 inches wide, only 0.15 inches wider than Chloe, and has a much taller 49-inch frame; its manual and page identify M19699 and M5789 conversion parts, without the Chloe page's M26058B board callout. Those small width differences should not overshadow the potentially more important package, finish and room-height checks.

The visual profile also changes the fit question. Chloe's prominent panel is a deliberate furniture style, but make sure it clears windows, shelving and any wall fixtures; the listed 43.5-inch height excludes whatever room those details need. If the main requirement is a crib no wider than 30 inches, M11441 will not pass the questionnaire's documented-width comparison. If the adult bed path is not needed, compare simpler full-size cribs by the exact toddler/daybed kit, mattress rules and included package rather than paying attention only to the “4-in-1” count.

What the evidence does and does not establish

The exact M11441 model-code keyword request to CPSC SaferProducts.gov returned an empty JSON list. This limited query cannot clear an individual serial number, used unit, old stock or unknown variant. Confirm the product label, condition and current notices, especially if considering a secondhand frame with missing parts. The review uses the exact product page and product data, the linked M11441 manual and the narrow CPSC keyword query. It is a source-based assessment, not a report of ownership, assembly, physical measurement or safety testing.