DaVinci Fiona M20801 4-in-1 Convertible Crib review

DaVinci's Fiona M20801 is a full-size crib with a high arched headboard, floral detail and a documented route to toddler bed, daybed and adult full-size bed. The maker lists assembled dimensions of 57 inches long, 30.4 inches wide and 49 inches high, and a weight of 66.2 pounds. That makes its height and heft a practical part of the room check, not just decorative details. The width is a product measurement; it does not include access, assembly or conversion space.

Keep Fiona M20801 distinct from Frem M27301

The captured product data lists White M20801W and Walnut M20801L under Fiona product ID 6031140159650, with both finish variants marked available in that record. No mechanical difference by finish is established. The pictured reference is specifically White M20801W. It is a staged manufacturer image of the exact SKU, not evidence that an extra mattress or bedding is included.

The model code deserves attention because the DaVinci conversion-kit page also has an entry for a separate Frem model that repeats M20801, while the observed Frem product page and fact record identify M27301. This assessment does not use that repeated entry to infer Frem compatibility. Fiona is independently identified by its own M20801W/L product listing, linked M20801 manual and Fiona product description. Keep those exact product names and codes visible when checking a used frame, a retailer offer or a replacement kit.

DaVinci describes the Fiona as solid New Zealand pine with TSCA-compliant MDF and claims GREENGUARD Gold certification. The product page also refers to a 135-pound slat-strength figure and to a 50-pound maximum user weight. These are manufacturer statements with different meanings; slat strength is not a child-use limit. This article does not independently assess the materials or certification.

Four configurations and separate conversion pieces

The Fiona page and exact manual document crib, toddler-bed, daybed and full-size-bed arrangements. The toddler-bed rail is M19699; the adult-bed rail kit is M5789. Both are shown as separate purchases in the product information and the manual labels them as not included. The M20801 row on DaVinci's compatibility table also identifies these two kits for Fiona. A later adult bed is not an additional full-size crib arrangement, and its hardware should not be counted as part of the base crib.

Four mattress-support positions are documented for the crib. Fiona's exact manual says to lower the support when the child can sit or stand and to stop using the crib when the child begins climbing out or reaches 35 inches tall. For toddler-bed use, it gives a minimum intended age of 15 months and a maximum weight of 50 pounds. These instructions belong to the relevant setup; do not apply one stage's warning to all four configurations. The adult-bed section is a separate set of assembly directions rather than evidence that the crib can be used in multiple arrangements at once.

The Fiona product page lists both M19699 and M5789 but does not call out the separate M26058B bunkie board that appears in some other crib listings. This review therefore does not add a bunkie-board requirement or assume the adult bed needs none. Before a full-size-bed conversion, check the exact M20801 manual and verify the support components for the specific purchase.

Measure the right footprint and verify mattress fit

For a full-size crib mattress, the M20801 manual requires at least 51 5/8 inches in length and 27 1/4 inches in width, six inches maximum thickness and a side gap no greater than three centimeters. DaVinci lists a 52-by-28-inch interior crib area. The product page presents mattress choices separately from the base crib, so the base offer does not establish an included standard mattress. If a seller bundles one, identify its model and compare its measurements with the manual rather than relying on “standard” in the listing title.

The 30.4-inch listed width first fits a half-inch questionnaire ceiling at 30.5 inches. It is slightly wider than the 30.25-inch Chloe Regency M11441 and 0.9 inch wider than the 29.5-inch Beau M23901; those comparisons may matter at a tight product-width threshold. The full frame is also taller than either of those models: Fiona is listed at 49 inches, Chloe at 43.5 and Beau at 39.75. Check nearby shelving, window treatments, assembly access and eventual bed conversion space separately. The sources reviewed do not document wheels for the Fiona full-size crib mode.

Who may want to compare Fiona

Fiona makes most sense to compare when the household wants the high decorative headboard and an eventual adult-bed route, and is prepared to source the separate toddler rail, adult-bed rails and a standard mattress. Someone focused first on the narrowest footprint among these three should inspect Beau; someone drawn to a molded Regency panel should compare Chloe's slightly narrower frame and its explicitly named M26058B board requirement. Those are not plug-compatible alternatives: each model has its own manual and kit identity.

For an adult-bed plan, model identity is essential. The repeated M20801 entry beside Frem M27301 is a manufacturer-table discrepancy, not permission to use Fiona instructions or hardware with another model. For a small nursery, map the full assembled outline and height, then include doorway width and future assembly/conversion space. For a mattress already owned, use the exact M20801 limits. An image, conversion count or shared brand does not replace those checks.

Research limits

The exact M20801 model-code keyword request to CPSC SaferProducts.gov returned an empty JSON list. The result is limited and cannot clear a specific unit, lot, serial number or older production period. Check the crib label, condition, current notices and all required components. This assessment is based on the exact Fiona product page/data, its linked manual, the current compatibility listing and a narrow CPSC keyword query. No product was purchased, owned, assembled, measured or safety-tested for this article.